![Some helpful tip for Petri Art](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_22.png?v=1695983189&width=4000)
Some helpful tip for Petri Art
Let's talk about the technique of Petri Art. I'm not an expert, nor have I created any wonderful Petri Art, but I do understand the science behind this. There are 3 elements to Petri Art. The r...
![Resin Curing Stages- Important!!!](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_12_588caf89-21b8-40ab-a3d8-462d37f5f509.png?v=1689245997&width=4000)
Resin Curing Stages- Important!!!
Guys here is the correct analysis of the graph and what it indicates for resin artists. The graph suggests curing characteristics for the same resin, at 3 different casting temperatures. It shows ...
![Resin and Humidity Tips by The Mould Story](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_1_c820c64b-df09-4d9a-8f2b-6fc4efeab5e8.png?v=1689245783&width=4000)
Resin and Humidity Tips by The Mould Story
Resin is a chemical that goes through a chemical reaction. Any excess water can interfere with this reaction, or affect the transparency of the resin. This happens because of Amine’s in the resin...
![Is your resin product bending while curing/after demoulding?](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_17_3c50abea-3363-472f-ac90-3ecb6de61cf8.png?v=1689245420&width=4000)
Is your resin product bending while curing/after demoulding?
The bending can happen of course due to two reasons: 1. Poor quality Silicone mould that warps as heat is generated and chemical curing reaction of epoxy takes place or 2. Resin that isn't curing e...
![What is Density and why is it important to resin artists?](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_18_870ec022-0bc3-4c04-b276-57ea1810bd12.png?v=1689245121&width=4000)
What is Density and why is it important to resin artists?
Density is a measure of how much mass is contained in a given volume of a material. Essentially, it is a measure of how tightly packed the molecules are in a material. The density of a material det...
![2:1 and 3:1 Resin](http://www.themouldstory.com/cdn/shop/articles/Blog_posts_20.png?v=1689245072&width=4000)
2:1 and 3:1 resin have the same basic chemistry. All resins have two components right, a base and a catalyst. 2 or 3 is the base, and the 1 is the catalyst. The higher the ratio of catalyst, the...