Clock Spacer Mould

We designed this clock spacer mould so you don't have to drill holes anymore for your clocks! Simply place the clock spacer mould (as shown) in the center of your mould and press. It's a good idea to apply a bit of Silicone sealant at the bottom and create a gasket so that no resin leaks underneath it. 

This clock spacer mould is designed to fit all the readily available clock machines in the market. When using this mould to create a space the machine will completely dissapear into the clock so the clock can be hung flat against the wall.

However please keep in mind that this spacer will work best with a full pour in moulds that are 20mm and more, as this will leave 4mm of resin as a base on top of it. Pouring less may make the spacer outlines visible from the front.

Note- The featured 11" clock mould is only used as an example on how to use the clock spacer mould.

Dimension: 60mm by 60mm, Machine gap height 16mm, Spindle Height- 16mm, Spindle Gap- 9mm diameter

Material: High Quality Silicone

Product Code: TMSR315